Bonded Tube Mounts - 500SL Mount Series

Rugged, versatile isolator utilizes elastomer-in-shear for low frequency vibration and in compression for impact shock.

Barry 500SL Series mounts are best suited for applications that require a low vertical natural frequency in conjunction with impact shock protection and superior structure borne noise attenuation.

Features

Fail-safe when used with snubbing washer
Axial to radial stiffness of 1:2.5
Low natural frequency
Sturdy, reliable construction

Benefits

Economical
Bonded construction provides constant performance characteristics
Overlapping load ranges

Load Range

558SL = 2 load ratings to 250 lbs. per mount
562SL = 2 load ratings to 520 lbs. per mount
566SL = 2 load ratings to 1,800 lbs. per mount

Applications

Truck, bus and marine engines
Generators
HVAC equipment
Farm and construction equipment
Truck cabs
Machinery, pumps & compressors

Environmental Data

Neoprene elastomer has an operating temperature range of -20°F to +180°F (-30°C to +82°C) and is resistant to oils, most solvents and ozone.
Special elastomers and finishes are available for applications in severe environments. Please note that Silicone elastomer is not compatible with nickel plating.

NATURAL FREQUENCY	7-10 Hertz
TRANSMISSIBILITY AT RESONANCE	8:1
RESILIENT ELEMENT	Neoprene
STANDARD MATERIALS	Cold-rolled steel
WEIGHT	See dimensional drawings
Mounting Hardware \| Ordering Information

558SL | 562SL | 566SL |