Bonded Tube Mounts - HR Mount Series

Vibration mounts for effective isolation of small to medium sized diesel engines.

Barry HR Series mounts are best suited for isolation of diesel engines with five or less cylinders for on or off-highway applications. The standard neoprene elastomer provides resistance to oils and most solvents. Other elastomers are available, consult factory for more information.

Features

Wide load range
Axial to radial stiffness of 6:1
Low stiffness in roll mode
Sturdy, reliable construction

Benefits

Built-in rebound protection
Excellent performance even with difficult to isolate five, three, two or even single cylinder engines
Overlapping load ranges
Fail-safe when used with snubbing washer

Load Range

2 sizes and 5 stiffness from 25 - 400 lbs. per isolator

Applications

Small to medium diesel engines
Generators
Recreational/off road Vehicles
Farm and construction equipment
Motors
Machinery, pumps & compressors

Environmental Data

Neoprene elastomer has an operating temperature range of -40°C to +93°C and is resistant to oils, most solvents and ozone.

NATURAL FREQUENCY	10-20 Hertz
TRANSMISSIBILITY AT RESONANCE	8:1
RESILIENT ELEMENT	Neoprene
STANDARD MATERIALS	Steel and sintered metal
WEIGHT	7 oz. (25453) 9 oz. (25641)
Mounting Hardware \| Installation

25453 | 25641