 |
The use of snubbing washers is recommended to ensure proper static and dynamic loading
of the isolator and retention of suspended equipment under severe shock environments
Snubbing washers are ordered by separate part numbers as shown in the above table. The
standard material is low-carbon steel and the standard finish is zinc plate. Other
materials and finishes are available upon request.
Please consult dB Engineering for more information on the use of snubbing washers. |
| Part # |
"A" Dia. |
"B" Dia. |
"C" |
| 9810321-01000 |
1.5" |
.27" |
.062" |
|